I regularly have the need to try things out on Linux. Sometimes a virtual machine won't cut it for me typically due to memory, disk and performance limitations. Moreover, a decent, up-to-date, bootable Linux environment is a great backup in case all of my other computers are broken, infected or stolen. That entails having the Linux installation on an external, USB-attached hard disk drive which can boot with relative ease on any UEFI-enabled PC (driver compatibility notwithstanding). Moreover, all the preparatory work has to be performed using a single-boot Windows computer without ending up having a dual boot system. It sounds tough. It is tough, but I'm writing this from my portable Ubuntu Linux installation running off a USB-attached SSD!


What you need

Remember to take backups of all your critical files and folders before continuing. You are going to make changes to your computer. If it breaks don't cry, I warned you. Also test both your bootable media. Twice. You will need them both!


Having a dual- or multi-boot system isn't as straightforward as it used to be a decade ago. Nowadays, in the interest of security, performance and backwards compatibility, there are many semi-hidden options and features which can get in your way. Given enough experience and patience you can work around them. Below is a selection of problems that got me moderately stumped along the way.

Secure boot caveat

I have only tested these instructions with Secure Boot turned off. Even though Ubuntu does support Secure Boot (it comes with signed bootloaders) I have no idea if my method uses the signed bootloaders or not. I suggest turning off Secure Boot if possible.

FastBoot caveats

Many boards come with some sort of "fast boot" or "boot optimization" options. For example, my Intel NUC has an option called Fast Boot which won't let me choose an alternative boot device at startup. It also has an option to support Intel Rapid Start Technology which does get in the way of booting to multiple OS. I had to disable both.

It's worth noting that Windows 8 and 10 have an Fast Startup or Fast Boot feature. This feature takes some shortcuts when it comes to booting and also makes the NTFS filesystem remain in a dirty state, making it unwriteable from Linux. It's best to understand what it does and disable it if you plan on writing to your Windows drive from Linux.

USB host controller caveat

Some firmwares will present the USB host controller as UHCI (USB 1.1) at boot time. When Linux probes for an xHCI (USB 3) host controller during the boot process they will respond positively. At this time Linux loads the xHCI driver and the USB host controller resets itself.

However, your root filesystem is inside a device attached to this USB controller. Therefore the controller resetting means that Linux can no longer communicate with the USB-attached hard drive. Therefore the Linux boot will hang forever without any further indication as to what went wrong.

Most affected boards (including my Intel NUC) have an option to enable the xHCI host controller interface by default. Enabling the xHCI option in the BIOS fixes the hanging boot issue. If you are only using modern operating systems with USB 3 support (anything newer than and including Windows 8.1 and Ubuntu Linux 15.04) you can safely enable that option.

Installing Linux

Boot your computer from the Ubuntu Linux bootable USB drive. Remember that you may have to enter your computer's boot manager to do that (on my Intel NUC I have to press F10; on most other BIOS I've seen it's F9; consult your BIOS documentation).

Install Ubuntu Linux regularly. When it prompts you about the disk layout choose Something Else and partition your external HDD the way you want. I chose to create a modestly sized root partition (about 40Gb), a swap partition that's as big as the biggest RAM configuration I am going to be using this installation with plus one Gb (my computers max out at 16Gb so I made a 17Gb swap partition) and the rest of the disk went to a massive /home partition.

Caveat: I chose to use btrfs which – as I learned along the way – makes things a bit more complicated down the line. For your sanity's sake I recommend using ext4. This guide assumes the use of btrfs and will point out the caveats with this approach.

Fix Windows 10 boot

Unfortunately the Ubuntu Installer assumes that you want a dual booting configuration alongside Windows. Therefore it adds itself (actually, the bootloader it uses, GRUB2) to your computer's UEFI configuration. This causes two problems. For starters, the external HDD is not portable as you cannot boot with it on another computer.

Secondly, if you remove this external HDD your Windows won't boot. Bummer. We have to fix that.

At this point exit the command prompt and shut down your computer.

Create an ESP on the Ubuntu HDD

A hard drive is not bootable with UEFI unless it has an ESP (EFI System Partition). An ESP is simply a FAT32 partition with a special flag that tells the EFI BIOS to look inside it for boot information. We have to create one on your hard drive.

Make sure the Ubuntu installation on the external HDD can see the ESP

The new ESP on the external drive must be visible by the Ubuntu installation in the HDD. Otherwise GRUB2, the Linux bootloader, won't be able to update itself, making your system unbootable after the next kernel update at the latest.

The process is different depending on the format of your root partition on the external hard disk.

If you DID NOT use btrfs (e.g. you used ext4)

sudo umount /media/ubuntu/01234567-89ab-cdef-0123-4567890abcde 
sudo mount /dev/sdXY /mnt

If you DID use btrfs

If you DID use btrfs, you made your life complicated. We need to mount the btrfs subvolume containing the root partition instead of the entire partition. Otherwise you'll never be able to install GRUB and you'll probably lose an entire day, like me.

btrfs subvolume list /media/ubuntu/01234567-89ab-cdef-0123-4567890abcde

This will give you a line with a numeric ID. Let's say 123. Note it down.


umount /media/ubuntu/01234567-89ab-cdef-0123-4567890abcde
mount /dev/sdXY -o subvolid=123 /mnt

The rest of the instructions are common, no matter if used btrfs, ext4 or something else

Install GRUB2 on the external drive's EFI System Partition

Right now our external drive has an empty ESP. We need to put a bootloader in it to make it actually, well, bootable.

First caveat: all the instructions you find on-line assume you are using a dual boot system with Windows or macOS. When you have an external drive it is critical that you use the --removable option in the last step. This installs the EFI bootloader under the special "fallback path" EFI\Boot\bootx64.efi in the ESP. Normally this not supposed to be used for permanently installed Operating Systems. It's the mechanism used by EFI BIOS to boot arbitrary external media. Technically, that's exactly what our external hard drive is: arbitrary external media!

Second caveat: installing the bootloader is only possible from inside the Linux installation we want to boot. However, we need the bootloader to boot that installation, leading to a Catch-22 issue. The solution is to run the bootloader installation through a chroot jail. The actual caveat that got me stumped for a day comes from the fact that I am using btrfs (because it's so much better for SSDs!). btrfs has subvolumes. If you mount the entire partition instead of a subvolume the grub-install script can't figure out the mapping between paths and devices, therefore failing to install itself on the ESP, returning the cryptic error

/usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?).

The error is misleading! /dev is mounted if you follow my instructions below. The actual problem, as I understand it, is that there is a discrepancy between the mounted device and the path to the chroot root. That's why I had you mount only the subvolume containing the root filesystem in the steps above. If you were not paying attention, you are not following the instructions step-by-step, you rebooted before this step or just came here directly looking for a solution to your problem about GRUB not installing look above for instructions on mounting the correct btrfs subvolume.

Now your external HDD is bootable. Reboot your computer, select it from the boot media selection of your UEFI BIOS and you're done!